Concentrates of dyes and additives

FOR POLYETHYLENE AND POLYPROPYLENE

WHITE  pigment superconcentrate is a titanium dioxide concentrate or a combination of titanium dioxide with other polymer-based technological additives, in particular, LLDPE, HDPE, LDPE, PP.

Pigment superconcentrates produced by Realpaks have excellent dispersion characteristics, optimal flow characteristics, provide high coverage and color saturation, which leads to uniform pigment distribution and simplifies processing.

Realpaks offers white dyes for PE and PP:

  • with varying titanium dioxide content (from 30 to 70%);
  • with different contents of technological additives and special fillers (micronized calcium carbonate, modifying additives);
  • made on different polymer bases: LLDPE, HDPE, LDPE, PP or their mixtures
  • intended for painting films of various thicknesses (from 15 microns), cast products and products obtained by extrusion and blow molding.

The introduction of superconcentrate into unpainted polymer depends on the type of product and ranges from 1 to 4%.

CODE COLOR Polymer Carrier Dyed Polymers Titanium Dioxide Content Additives Heat Resistance Lightfastness Contact with Food Application
10007 Blue-White PE PE, PP 55 Micronized calcium carbonate 300 8 Yes Casting, extrusion
10008 Snowy PE PE, PP 70 300 8 Yes Films, casting, extrusion
10015 White PE PE, PP 55 Micronized calcium carbonate 300 8 Yes Films, casting, extrusion
10030 Snowy PE PE, PP 70 Erucamide 300 8 Yes Films (milk film)
10039 White PE PE, PP 70 Micronized calcium carbonate 300 8 Yes Films, casting, extrusion

BLACK pigment superconcentrates are carbon black concentrates or carbon black combinations (from 30% to 40%) with other technological additives (micronized calcium carbonate, modifying additives) on a polymer basis, in particular LLDPE, PENT, PELT, PP (LLDPE, HDPE, LDPE, PP).

These dyes are widely used in the production of various types of films, cast and extruded products. The dyes have a high level of opacity and pigment dispersion, which contributes to achieving a good effect when dyeing.

The addition of superconcentrate to the polymer depends on the type of product and ranges from 1 to 4%.

CODE COLOR Carrier Polymer Dyed Polymers Carbon Black Content Additives Heat Resistance Lightfastness Contact with Food Application
10201 Black PE PE, PP 30 Micronized calcium carbonate 300 8 Yes Casting, extrusion
11201 Black PP PP 30 Micronized calcium carbonate 300 8 Yes Casting, extrusion
10206 Black PE PE, PP 40 Oleamide 300 8 Yes Films, casting, extrusion
10211-3 Black PE PE, PP 25 Micronized calcium carbonate 300 8 Yes Films, casting, extrusion
10212-3 Black PE PE, PP 30 Micronized calcium carbonate 300 8 Yes Films, casting, extrusion
10214 Black PE PE, PP 40 300 8 Yes Films, casting, extrusion
10204 Black PE PE, PP 35 Micronized calcium carbonate 300 8 Yes Casting, extrusion
COLOR superconcentrates of dyes for polymers are a complex of color pigments or a combination of color pigments with technological additives, included in the appropriate polymer base. The dyes have a high level of opacity and pigment dispersion, which contributes to achieving a good effect when dyeing. Realpaks offers colored dyes for PE and PP:
  • for painting films of various thicknesses (from 15 microns), cast products, products obtained by extrusion and blow molding;
  • made on various polymer bases LLDPE, PENT, LDPE, PP (LLDPE, HDPE, LDPE, PP) or their mixtures;
  • with varying contents of technological additives and special fillers (micronized calcium carbonate, sliding additives, flavorings, antistatic additives, etc.);
  • with different light and heat resistance.
The addition of superconcentrate to unpainted polymer depends on the type of product and ranges from 1 to 4%. It is also possible to manufacture pigment superconcentrates according to the customer’s specifications.
CODE COLOR Close Pantone Carrier polymer Dyed polymers Heat resistance Lightfastness Contact with food Application
10 103 Gray 420 PE PE, PP 250 7-8 No Casting, extrusion
10 104 Gray 431 PE PE, PP 250 7-8 Yes Casting, extrusion
10,303 Green - PE PE, PP 250 6-7 Yes Films, casting, extrusion
10,302 Yellowish-green 348C PE PE, PP 250 6-7 Yes Casting, extrusion
10,305 Green 339C PE PE, PP 250 7 Yes Casting, extrusion
10,307 Dark green 336C PE PE, PP 240 7-8 Yes Films, casting, extrusion

Superconcentrates of dyes with decorative effects allow to give products a new, unique shade. Dyes have a high level of coverage and dispersion of pigments, which contributes to achieving a good effect when dyeing. Such dyes have a wide range of applications.

Pearlescent effect – superconcentrates of dyes that give a pearlescent shade to the finished product, available in various color shades. White ones give products a pearly shine. Colored ones can have a rainbow effect (change of shade at different angles).

Fluorescent effect – superconcentrates of dyes that give the final product bright “burning” tones – from bright pink to bright green.

A metallic effect can be achieved by applying a silver-tone superconcentrate.

Glitter effect – super concentrates that give the finished product the effect of granite, dots, speckles, etc.

Special effect masterbatches are designed for basic manufacturing processes such as injection molding, extrusion. The introduction of dye into the undyed polymer depends on the type of product and ranges from 1 to 4%.

CODE COLOR Carrier polymer Colored polymers Heat resistance Light-fastness Contact with food
10 001P White mother of pearl PE PE, PP 300 8 Yes
10 002P White mother of pearl PE PE, PP 280 8 Yes
10 104P Grey metallic PE PE, PP 250 8 Yes
10 108P Grey metallic PE PE, PP 250 8 Yes
10 109P Grey metallic PE PE, PP 300 7-8 Yes
10 309P Light green mother of pearl PE PE, PP 250 7-8 Yes
10 401P Dark blue metallic PE PE, PP 250 7-8 Yes
10 409P Light blue mother of pearl PE PE, PP 250 7-8 Yes
10 412P Blue mother of pearl PE PE, PP 250 7-8 Yes
10 501P Bronze PE PE, PP 250 7-8 Yes
10 701P Gold PE PE, PP 250 7-8 Yes

Concentrates of modifying additives for PE and PP are a complex of special additives introduced into the polymer base, which during the production process facilitate processing or provide additional technological qualities to finished products.

The Realpaks company offers concentrates of modifying additives of various types and purposes.

Name Brand Active Ingredient Application
Slip additive concentrate SD-1005 “O” Oleamide / Erukamide Improves film sliding, facilitates sleeve opening, and gives additional shine to the product surface.
SD-1005 “E” - - -
SD-1105 “E” - - -
Anti-blocking additive concentrate AC-1005, AC-1015 High quality micronized calcium carbonate, silicon dioxide Improves adhesion during printing, prevents sleeve sticking, and reduces raw material costs.
Combination of sliding and anti-lock additives ABSD-1010/5, ABSD-1010/5 "E" Oleamide/Erucamide, Silicon Dioxide Improves adhesion during printing, prevents sleeve sticking and reduces the coefficient of friction of films.
Antistatic additive concentrate AC-1005, AC-1015 Purified monoglyceride Removes static charge during the production process, prevents charge formation on the surface of the product.
Light stabilizer concentrate UV-1010, UV-1020, UV-1120, UV-1120-1 Sterically hindered amines Increases the service life of products that are operated in daylight in the open sun.
Processing Additive (Processing Enhancer Concentrate) F 2.5-10, F 2.5-11 Fluoroelastomer Increases the productivity of extrusion equipment by 20-25%, improves the surface quality of films.
Desiccant concentrate O-1070, O-1070/10, O-107015 Moisture absorber For processing wet secondary raw materials.
Whitening additive concentrate OB-10025, OB-10025-1 Bleach Reduces yellowness, increases the brightness of colored products, especially effective when used in recycled materials.
Flame retardant concentrate AK-1050, AK-1070 Aliphatic bromine Gives PE products self-extinguishing properties.
Flow modifier PP-11025 - Increases the fluidity of the material, contributes to increased productivity of the process during processing.
Brightening additive concentrate DM 7.5-11 Nucleator Increases the rigidity and impact strength of cast products, improves processability.
The concentrate is filled with melon AB-1075, AB-1075L, KM-1175 High quality micronized calcium carbonate Improves adhesion during printing, prevents sleeve sticking and reduces raw material costs.
The concentrate is talc-filled KTN-1060 - -

FOR POLYSTYRENE

WHITE pigment superconcentrates  are titanium dioxide concentrates or a combination of titanium dioxide with other polymer-based technological additives, in particular UPS, PSS, ABS plastic (HIPS, GPPS, ABS). Pigment superconcentrates produced by Realpaks have excellent dispersion characteristics, optimal flow characteristics, provide high hiding power and color saturation, which leads to uniform pigment distribution and simplifies processing. The Realpaks company offers white dyes for PS:
  • with varying titanium dioxide content (from 40 to 60%);
  • with different contents of technological additives and special fillers, made on different polymer bases of UPS, PSS, ABS plastic (HIPS, GPPS, ABS) or on their mixtures, intended for painting molded products of various thicknesses.
The introduction of superconcentrate into unpainted polymer depends the type of product and ranges from 1 to 2%.
CODE COLOR Carrier polymer Colored polymers Titanium dioxide content Additives Heat resistance Light-fastness Contact with food Application
20,005 Snowy PS UPM, PSS, ABS plastic 50 Micronized calcium carbonate 300 7-8 Yes -
20,002 White PS UPM, PSS, ABS plastic 40 Micronized calcium carbonate 300 7-8 Yes -
20,004 Snowy PS UPM, PSS, ABS plastic 40 Micronized calcium carbonate 300 7-8 Yes -
20,006 White PS UPM, PSS, ABS plastic 60 Micronized calcium carbonate 300 7-8 Yes -
20,007 Bluish-white PS UPM, PSS, ABS plastic 50 Micronized calcium carbonate 300 7-8 Yes -
20,015 White PS UPM, PSS, ABS plastic 50 Micronized calcium carbonate 300 7-8 Yes -
20,022 Bluish-white PS UPM, PSS, ABS plastic 40 Micronized calcium carbonate 300 7-8 Yes -
20 023-1 Bluish-white PS UPM, PSS, ABS plastic 50 Micronized calcium carbonate 300 7-8 Yes -
20,024 Bluish-white PS UPM, PSS, ABS plastic 60 Micronized calcium carbonate 300 7-8 Yes -
BLACK  pigment superconcentrates are carbon black concentrates or combinations of carbon black (from 30% to 40%) with other technological additives (micronized calcium carbonate) on a polymer basis, in particular, UPS, PSS, ABS plastic (HIPS, GPPS, ABS). These dyes are widely used in the production of various types of cast products. The dyes have a high level of opacity and pigment dispersion, which contributes to achieving a good effect when dyeing. The introduction of superconcentrate into the polymer depends on the type of product and ranges from 1 to 4%.
CODE COLOR Carrier polymer Colored polymers Carbon black content Additives Thermal stability Light-fastness Contact with food Application
20201 Black PS UPM, PSS, ABS plastic 30 - 300 8 Yes Cast products, sheets
20202 Black PS UPM, PSS, ABS plastic 40 - 300 8 Yes Cast products, sheets

Colored pigment superconcentrates  are a complex of colored pigments or a combination of colored pigments with technological additives included in the appropriate polymer base, in particular, UPS, PSS, ABS plastic (HIPS, GPPS, ABS).

These dyes are widely used in the production of various types of cast and extruded products, as well as in the coloring of foamed PS. The dyes have a high level of opacity and pigment dispersion, which contributes to achieving a good effect when coloring.

Dyes are produced in a wide range of colors, including various decorative effects. The introduction of superconcentrate into the polymer depends on the type of product and ranges from 1 to 4%.

The table shows the existing standard range of colored pigment superconcentrates for polystyrene.

CODE COLOR Name Close Pantone Carrier polymer Dyed polymers Heat resistance Lightfastness Contact with food
Gray Gray - - PS - - Yes

Concentrates of modifying additives for PS  are a complex of special additives introduced into the polymer base, which during the production process facilitate processing or provide additional technological qualities to finished products.

The Realpaks company offers concentrates of modifying additives of various types and purposes.

Name Brand Active substance Application
Melonapolnenny concentrate AB-2060 KM-2040 High-quality micronized calcium carbonate of imported production. Improves polystyrene processing, reduces product shrinkage during injection molding, deformation, and shrinkage. Reduces raw material consumption, improves physical and mechanical properties of the product, increases product rigidity and strength, and reduces the cost of the finished product.
Talc-filled concentrate KTN-2050 Imported microtalc Reduces shrinkage of large-sized molded products, increases rigidity, impact strength, and thermal deformation resistance. Used as a nucleator to regulate the foam structure for foamed products.
Impact strength modifier UP-2055, UP-2060 Modified rubber Improves polystyrene processing, increases product strength and crack resistance by 50-80%.
Flow modifier MT-2018 Palm oil Increases material flowability, contributes to increased process productivity when processing materials.

For Polyvinyl chloride

CODE COLOR Name Close Pantone Carrier polymer Paintable polymers Thermal resistance Light resistance Contact with food Application
30001 - - - PVC - - - Yes -

For polycarbonate

CODE COLOR Name Close Pantone Carrier polymer Paintable polymers Thermal resistance Light resistance Contact with food Application
1223 t test - - - - - Yes -

For polyamides

For animals.

CODE COLOR Name Close Pantone Carrier polymer Paintable polymers Thermal resistance Light resistance Contact with food Application
40001 White - - - - - - Yes -

Let’s start working together

Feel free to contact us anytime.

Contact us